The body is made of high quality ABS engineering plastic, with excellent corrosion resistance to strong acids and alkalis. It is suitable for use in strong corrosive environments where even stainless steel cannot meet the requirements of use.
Precautions for places of use
I. Stay away from plexiglass glue, benzene, acrylic, methacrylic chemicals.
II. Keep away from open flames and materials that are combustible
III. Keep away from epoxy resins and curing agents
Technical Parameters
1.Manufacturing Standards：ANSI Z358.1-2014
2.Main material：ABS
3.Function：Eyewash
4.Working temperature：0℃～55℃
5.Applicable medium: Drinking water or clear water at room temperature and in line with sanitary standards
6.Nominal pressure：1.0MPa
7.Work pressure：0.2MPa～0.4MPa
8.Inlet size：Internal thread 1/2" (can be customized according to user requirements)
9.Drain size：Internal thread 1-1/4" (can be customized according to user requirements)
10.Eyewash flow：≥11.4L/min,(The eyewash nozzle is equipped with a buffer device to prevent secondary damage to the injured eye due to excessive water flow)
